COSI Proceedings

The Proceedings of Coatings Science International Conferences have been published as a special issue of Progress in Organic Coatings.

COSI 2010 / POC 70 [4](2011)

  1. G.de With, R.A.T.M. van Benthem, Editorial POC COSI 2010, POC 70 [4] (2011) 157-159.
  2. X. Liu, E. Elmahdy, R.D. Wildman, I.A. Ashcroft, P.D. Ruiz, Experimental investigation and material modelling of fresh and UV aged Japanese lacquer (Urushi) , POC 70 [4] (2011) 160-169.
  3. S. Saha, D. Kocaefe, C. Krause, T. Larouche, Effect of Titania and Zinc oxide particles on acrylic polyurethane coating performance, POC 70 [4] (2011) 170-177.
  4. Y. Butista, J. Gonzalez, J. Gilabert, M.J. Ibañez, V. Sanz, Correlation between the wear resistance and the scratch resistance for nanocomposite coatings, POC 70 [4] (2011) 178-185.
  5. G. Wuzella, A. Kandelbauer, A.R. Mahendran, A. Teisschinger, Thermochemical and isoconversional kinetic analysis of a polyester-epoxy hybrid powder coating resin for wood based panel finishing, POC 70 [4] (2011) 186-191.
  6. S. Kiil, Mathematical modelling of simultaneous solvent evaporation and chemical curing in thermoset coatings: a parameter study, POC 70 [4] (2011) 192-198.
  7. J. Manara, M. Reidinger, M. Rydzek, M. Arduini-Schuster, Polymer-based pigmented coatings on flexible substrates with spectrally selective characteristics to improve the thermal properties, POC 70 [4] (2011) 199-204.
  8. K. Dullaert, P. Steeman, J. Bolks, A mechanistic study of the effect of pigment loading on the appearance of powder coatings: The effect of surface topography on the optical properties of powder coatings: Modelling and experimental results, POC 70 [4] (2011) 205-212.
  9. J.M. Vega, N. Granizo, D. de la Fuente, J. Simancas, M. Morcillo, Corrosion inhibition of aluminium by coatings formulated with Al-Zn-vanadate hydrotalcite, POC 70 [4] (2011) 213-219.
  10. M. Cécius, C. Jérôme, A fully aqueous sustainalbe process for strongly adhering antimicrobial coatings on stainless steel, POC 70 [4] (2011) 220-223.
  11. V. Stenzel, Y. Wilke, W. Hage, Drag-reducing paints for the reduction of fuel consumption in aviation and shipping, POC 70 [4] (2011) 224-229.
  12. F. Simon, S. Kunkel, H. Oehler, D. Lellinger, P. Spahn, I. Alig, Investigation of deformation mechanisms during latex film formation by combination of unilateral NMR and near infrared spectroscopy, POC 70 [4] (2011) 230-239.
  13. H. Hintze-Bruening, A-L. Troutier, F. Leroux, Layered particle based polymer composites for coatings. Part III - Textured coatings obtained via lyotropic liquid crystals, POC 70 [4] (2011) 240-244.
  14. G. Guerriero, R. Alderliesten, T. Dingemans, R. Benedictus, Thermotropic liquid crystalline polymers as protective coatings for aerospace, POC 70 [4] (2011) 245-251.
  15. G.-L. Song, A dipping E-coating for Mg alloys, POC 70 [4] (2011) 252-258.
  16. M. Barletta, D. Bellisario, Manufacture and characterization of free-standing epoxy-polyester films, POC 70 [4] (2011) 259-272.
  17. M. Barletta, D. Bellisario, Effects of IR pre-curing conditions on wear resistance of metal-flakes powder coatings, POC 70 [4] (2011) 273-286.
  18. B. Díaz-Benito, F. Velasco, M. Pantoja, Mechanical properties of polyester films painted after silanization of 6063 aluminium alloy with different pretreatment conditions, POC 70 [4] (2011) 287-292.
  19. N. de Geyter, R. Morent, S. van Vlierberghe, M. Frère-Trentesaux, P. Dubruel, E. Payen, Effect of electrode geometry on the uniformity of plasma-polymerized methyl methacrylate coatings, POC 70 [4] (2011) 293-299.
  20. S. Shahidi, M. Ghoranneviss, Investigation on dye ability and antibacterial activity of nano-layer platinum coated polyester fabric using DC magnetron sputtering, POC 70 [4] (2011) 300-303.
  21. E.H. Kim, J.H. Lee, Y.G. Jung, Dual Coating process for a high functional reinforcement phase for metal matrix composite, POC 70 [4] (2011)304-309.
  22. E.H. Kim, J.H. Lee, Y.G. Jung, C. Lee, M. Lee, J. Park, Preparation of Ni-coated TiC particles using potential hydrogen (pH) for dispersion into a molten metal, POC 70 [4] (2011) 310-317.
  23. A.K. Krella, Cavitation erosion resistance parameter of hard CAVD coatings, POC 70 [4] (2011) 318-325.
  24. A.P. Mousinho, R.D. Mansano, Micropatterning of single-walled carbon nanotubes forest, POC 70 [4] (2011) 326-329.
  25. D.A. Molloy, S. Malinov, T. McNally, P. Hill, Thermal study of selectively plated nickel sulfamate coatings, POC 70 [4] (2011) 330-335.
  26. R. Morent, N. de Geyter, S. van Vlierberghe, A. Beaurain, P. Dubruel, E. Payen, Influence of operating parameters on plasma polymerization of acrylic acid in mesh-to-plate dielectric barrier discharge, POC 70 [4] (2011) 336-341.
  27. T. Nesterova, K. Dam-Johansen, S. Kiil, Synthesis of durable microcapsules for self-healing anticorrosive coatings: a comparison of selected methods, POC 70 [4] (2011) 342-352.
  28. N. Ohtsu, M. Hayashi, J. Ueta, T. Kanno, Biofunctional calcium titanate coating on titanium by simple chemical treatment process using calcium-hydroxide slurry: Effects of the heating temperature, POC 70 [4] (2011) 353-357.
  29. Y. Bautista, M.P. Gómez, C. Ribes, V. Sanz, Relation between the scratch resistance and the chemical structure of organic-inorganic hybrid coatings, POC 70 [4] (2011) 358-364.
  30. V.Z. Rizzo, R.D. Mansano, Electro-optically sensitive Diamond-Like Carbon thin films deposited by reactive magnetron sputtering for electronic device applications, POC 70 [4] (2011) 365-368.
  31. M. Rydzek, M. Reidinger, M. Arduini-Schuster, J. Manara, Comparative study of sol-gel derived tin-doped indium- and aluminum doped zinc-oxide coatings for electrical conducting and low-emitting surfaces, POC 70 [4] (2011) 369-375.
  32. S. Saha, D. Kocaefe, Y. Boluk, A. Pichette, Enhancing exterior durability of jack pine by photo-stabilization of acrylic polyurethane coating using bark extract: part 1- effect of UV on color change and ATR-FTIR, POC 70 [4] (2011) 376-382.
  33. M. Samadzadeh, S. Hatami Boura, M. Peikari, M. Kasiriha, A. Ashrafi, Tung oil: an autonomous repairing agent for self-healing epoxy coatings, POC 70 [4] (2011) 383-387.
  34. M. Ghorannevis, S. Shahidi, A. Anvari, Z. Motaghi, J. Wiener, I. Slamborova, Influence of plasma sputtering treatment on natural dyeing and antibacterial activityof wool fabrics, POC 70 [4] (2011) 388-393.
  35. N. Granizo, J.M. Vega, I. Díaz, B. Chico, D. de la Fuente, M. Morcillo, Paint systems formulated with ion-exchange pigments applied on carbon steel. Effect of surface preparation, POC 70 [4] (2011) 394-400.

COSI 2009 / POC 68 [1-2](2010)*

  1. G. de With and R.A.T.M. van Benthem, Editorial POC COSI 2009, POC 68 [1-2] (2010) 1-2.
  2. M. Wouters, C. Rentrop, P. Willemsen, Surface Structuring and Coating Performance Novel biocidefree nanocomposite coatings with anti-fouling and fouling release properties , POC 68 [1-2] (2010) 4-11.
  3. A.C.C. Esteves, J. Brokken-Zijp, J. Laven, G. de With, Light converter coatings from cross-linked PDMS/particles composite materials , POC 68 [1-2] (2010) 12-18.
  4. Z-L. Wu, C-W. Wu, G-N. Chen, and K. Zhang, On a novel method of impact by front-end-coated bullet to evaluate the interface adhesion of the film and substrate , POC 68 [1-2] (2010) 19-22.
  5. W. Becker, M. Nagel, Rheological measurements as tool to study curing of water borne clear coats , POC 68 [1-2] (2010) 23-27.
  6. A. L. Yahkind, D.A. Paquet Jr., D. V. Parekh, C. L. Stine, and L. G. J. van der Ven, Polyols based on isocyanates and melamines and their applications in 1K and 2K coatings , POC 68 [1-2] (2010) 28-36. Orininal publication POC 67 [2] (2010) 137-145.
  7. A. Carroy, T. Hintermann, G. Baudin, D. Bauer, P. Contich, K. Dietliker, M. Faller, R. Kohli Steck, C. Lordelot, K. Misteli, Novel Latent Catalyst for 2K-PUR systems , POC 68 [1-2] (2010) 37-41.
  8. A. Mihashi, H. Tamura, E. Sato, and A. Matsumoto, Synthesis of degradable network polymers containing peroxy units in the main chain or the crosslinking point , POC 68 [1-2] (2010) 42-47. Original publication POC 67 [2] (2010) 85-91.
  9. G. Bierwagen, R. Brown, D. Battocchi and S. Hayes, Active Metal-Based Corrosion Protective Coating Systems for Aircraft Requiring No Chromate Pretreatment , POC 68 [1-2] (2010) 48-61. Original publication POC 67 [2] (2010) 195-208.
  10. D.D.N. Singh and D. Bhattacharya, Performance and mechanism of action of self priming organic coating on oxide covered steel surface , POC 68 [1-2] (2010) 62-69. Original publication POC 67 [2] (2010) 129-136.
  11. P. A. Sørensen, K. Dam-Johansen, C. E. Weinell, S. Kiil, Cathodic delamination: quantification of ionic transport rates along coating-steel interfaces , POC 68 [1-2] (2010) 70-78. Original publication POC 67 [2] (2010) 107-115.
  12. X. Shi, S.G. Croll, Recovery of surface defects on epoxy coatings and implications for the use of accelerated weathering , POC 68 [1-2] (2010) 79-87. Original publication POC 67 [2] (2010) 120-128.
  13. N. Alcón, A. Tolosa, M.T. Rodríguez, C. Moreno, Development of photoluminescent powder coatings bu UV curing process , POC 68 [1-2] (2010) 88-90. Original publication POC 67 [2] (2010) 92-94.
  14. D. Álvarez, A. Collazo, M. Hernández* , X. R. Nóvoa, C. Pérez, Characterization of hybrid sol-gel coatings doped with hydrotalcite-like compounds to improve corrosion resistance of AA2024-T3 alloys , POC 68 [1-2] (2010) 91-99. Original publication POC 67 [2] (2010) 152-160.
  15. M. Barletta, D. Bellisario, G. Rubino, N. Ucciardello, Scratch and wear resistance of transparent topcoats on carbon laminates , POC 68 [1-2] (2010) 100-110. Original publication POC 67 [2] (2010) 209-219.
  16. D. Bellisario, M. Barletta, N.Ucciardello, Scratch resistance of fast cured metal flake powder coatings , POC 68 [1-2] (2010) 111-119. Original publication POC 67 [2] (2010) 161-169.
  17. L. Barchi, U. Bardi, S. Caporali, M. Fantini, A. Scrivani, A. Scrivani, Electroplated bright aluminium coatings for anticorrosion and decorative purposes , POC 68 [1-2] (2010) 120-125. Original publication POC 67 [2] (2010) 146-151.
  18. C. Eckert, C. Pflitsch, B. Atakan, Sol-Gel deposition of multiply doped thermographic phosphor coatings Al2O3:(M3+1,M3+2)(M1,2=Dy, Cr, Tm) for wide range surface temperature measurement application , POC 68 [1-2] (2010) 126-129. Original publication POC 67 [2] (2010) 116-119.
  19. E-H. Kim, W-R. Lee, S-W. Myoung, J-P. Kim, Y.G. Jung, Y-S. Nam, W-S. Kyoung, H. Cho, Characterization of waterborne polyurethane for ecofriendly functional floor plate , POC 68 [1-2] (2010) 130-134. Original publication POC 67 [2] (2010) 102-106.
  20. J-Y. Kwon, S-I. Jung, S-Y. Lee, P-H. Lee, J-H. Lee, Y-G. Jung, U. Paik, H. Cho, J-C. Chang, Interfacial stability and contact damage resistance by incorporating buffer layer in thermal barrier coatings , POC 68 [1-2] (2010) 135-141. Original publication POC 67 [2] (2010) 95-101.
  21. R. López-Callejas, H. Millán-Flores, A. E. Muñoz-Castro; R. Valencia-Alvarado, A. Mercado-Cabrera, R. Peña Eguiluz, S. R. Barocio and A. de la Piedad Beneitez, Nitriding of 6061T6 aluminium by plasma immersion ion implantation at low energy , POC 68 [1-2] (2010) 142-145. Original publication POC 67 [3] (2010) 361-364.
  22. A. Nebatti, C. Pflitsch, C. Eckert, B. Atakan, Sol-Gel-Deposition of thin TiO2: Eu3+ thermographic phosphor films , POC 68 [1-2] (2010) 146-150. Original publication POC 67 [3] (2010) 356-360.
  23. S.M. Trey, C. Nilsson, E. Malmström, M. Johansson, Thiol-ene Networks and Reactive Surfaces via Photoinduced Polymerization of Allyl-ether Functional Hyperbranched Polymers , POC 68 [1-2] (2010) 151-158. Original publication POC 67 [3] (2010) 348-355.

*The Publisher regrets that articles from this COSI 2009 special issue were previously published in Progress in Organic Coatings, 67 [2] and [3] for citation purposes please use the original publication.

COSI 2008 / POC 64 [2-3](2009)

  1. G. de With and R.A.T.M. van Benthem, Editorial POC CoSi 2008 , POC 64 [2-3] (2009) 109-111.
  2. I. Alig, S. Tadjbach, P. Krüger, H. Oehler and D. Lellinger, Characterization of coating systems by scanning acoustic microscopy: Debonding, blistering and surface topology, POC 64 [2-3] (2009) 112-119.
  3. B. Liu, L. Wen and X. Zhao, Efficient degradation of aqueous methyl orange over TiO2 and CdS electrodes using photoelectrocatalysis under UV and visible light irradiation, POC 64 [2-3] (2009) 120-123.
  4. T. Iwamura, K. Adachi, M. Sakaguchi and Y. Chujo, Synthesis of organic—inorganic polymer hybrids from poly(vinyl chloride) and polyhedral oligomeric silsesquioxane via CH/π interaction, POC 64 [2-3] (2009)124-127.
  5. D.K. Chattopadhyay, A.D. Zakula and D.C. Webster, Organic—inorganic hybrid coatings prepared from glycidyl carbamate resin, 3-aminopropyl trimethoxy silane and tetraethoxyorthosilicate, POC 64 [2-3] (2009)128-137.
  6. A. Foyet, T.H. Wu, L. van der Ven, A. Kodentsov, G. de With and R. van Benthem, Influence of mixing ratio on the permeability of water and the corrosion performance of epoxy/amine coated un-pretreated Al-2024 evaluated by impedance spectroscopy, POC 64 [2-3] (2009) 138-141.
  7. P.A. Sørensen, S. Kiil, K. Dam-Johansen and C.E. Weinell, Influence of substrate topography on cathodic delamination of anticorrosive coatings, POC 64 [2-3] (2009) 142-149.
  8. A.. Weber, W. Bremser and K. Hiltrop, Creating new materials with melamine resins, POC 64 [2-3] (2009) 150-155.
  9. M. Wouters, E. Craenmehr, K. Tempelaars, H. Fischer, N. Stroeks and J. van Zanten, Preparation and properties of a novel remendable coating concept , POC 64 [2-3] (2009)156-162.
  10. P. Roose, I. Fallais, C. Vandermiers, M.-G. Olivier and M. Poelman, Radiation curing technology: An attractive technology for metal coating , POC 64 [2-3] (2009) 163-170.
  11. R. Knischka, U. Lehmann, U. Stadler, M. Mamak and J. Benkhoff, Novel approaches in NIR curing technology, POC 64 [2-3] (2009) 171-174.
  12. M. Shirai and H. Okamura, i-Line sensitive photoacid generators for UV curing, POC 64 [2-3] (2009) 175-181.
  13. A.-L. Troutier-Thuilliez, C. Taviot-Guého, J. Cellier, H. Hintze-Bruening and F. Leroux, Layered particle-based polymer composites for coatings: Part I. Evaluation of layered double hydroxides, POC 64 [2-3] (2009)182-192.
  14. H. Hintze-Bruening, A.-L. Troutier-Thuilliez and F. Leroux, Layered particle-based polymer composites for coatings: Part II–Stone chip resistant automotive coatings, POC 64 [2-3] (2009)193-204.
  15. E.H. Kim, S.W. Myoung, Y.G. Jung and U. Paik, Polyhedral oligomeric silsesquioxane-reinforced polyurethane acrylate, POC 64 [2-3] (2009) 205-209.
  16. A. Fedorov, W.-P. Vellinga and J. De Hosson, Gas permeation and temperature effects in laser-induced delamination, POC 64 [2-3] (2009) 210-215.
  17. N. Baklanova, L. Zhilitskaya and A. Titov, Organometallic polymer-derived interfacial coatings on carbon and SiC fibers, POC 64 [2-3] (2009)216-220.
  18. A.T. ten Cate, S.A.F. Reinders, D.H. Turkenburg, A. Bruin, F. D´Souza, G.T. Donnelly, P.R. Willemsen, J.H. Maas and K.J.C. van Bommel, High density hydrophilic and hydrophobic brush coatings using a polymeric primer layer, POC 64 [2-3] (2009) 221-224.
  19. G.J. Cruz, M.G. Olayo, E. Colin, J.C. Palacios, R. López, E. Granda, A. Muñoz and R. Valencia Metallic layers added by plasma on polyethylene, POC 64 [2-3] (2009) 225-229.
  20. N. De Geyter, R. Morent, S. Van Vlierberghe, P. Dubruel, C. Leys, L. Gengembre, E. Schacht and E. Payen , Deposition of polymethyl methacrylate on polypropylene substrates using an atmospheric pressure dielectric barrier discharge, POC 64 [2-3] (2009) 230-237.
  21. S.M. Trey, M. Lundström, D. Ståhlberg and M. Johansson, Effects of thiol additives on urethane acrylate UV primers for SMC applications, POC 64 [2-3] (2009) 238-246.
  22. M. Barletta, A. Gisario, G. Rubino and L. Lusvarghi, Influence of scratch load and speed in scratch tests of bilayer powder coatings, POC 64 [2-3] (2009)247-258.
  23. A.E. Muñoz-Castro, R. López-Callejas, E.E. Granda-Gutiérrez, R. Valencia-Alvarado, S.R. Barocio, R. Peña-Eguiluz, A. Mercado-Cabrera and A. de la Piedad Beneitez, Ion implantation of oxygen and nitrogen in CpTi, POC 64 [2-3] (2009)259-263.
  24. C. Fei, Z. Hai, C. Chen and X. Yangjian, Study on the tribological performance of ceramic coatings on titanium alloy surfaces obtained through microarc oxidation, POC 64 [2-3] (2009)264-267.
  25. J. Feng, J. Han and X. Zhao, Synthesis of CuInS2 quantum dots on TiO2 porous films by solvothermal method for absorption layer of solar cells, POC 64 [2-3] (2009)268-273.
  26. J.-P. Kim, E.-H. Kim, J.-H. Lee, Y.-G. Jung, N.-H. Kim, S.-C. Choi and U. Paik, Damage resistance of SiC and Si3 N4 coatings with control of microstructure and thickness, POC 64 [2-3] (2009) 274-280.
  27. M.T. Kim, D.S. Kim and O.Y. Oh, In situ deposition of oxide layer using fuel additive and its effect on the oxidation of SM 45C blades for micro-gas turbines , POC 64 [2-3] (2009) 281-286.
  28. A. Kirchner and J. Houweling, Measuring flake orientation for metallic coatings, POC 64 [2-3] (2009 )287-293.
  29. K. Lachmann, S. Eckert, A. Vogel, A. Klinger, A. Gebert and C.-P. Klages, Development of a multifunctional coating system for laser-induced material transport, POC 64 [2-3] (2009) 294-299.
  30. X. Lou, X. Zhao, J. Feng and X. Zhou, Electrochromic properties of Al doped B-subsituted NiO films prepared by sol–gel, POC 64 [2-3] (2009) 300-303 .
  31. R. Morent, N. De Geyter, S. Van Vlierberghe, P. Dubruel, C. Leys, L. Gengembre, E. Schacht and E. Payen, Deposition of HMDSO-based coatings on PET substrates using an atmospheric pressure dielectric barrier discharge, POC 64 [2-3] (2009) 304-310.
  32. S.-W. Myoung, S.-I. Jung, E.-H. Kim, Y.-G. Jung, Y.-S. Nam and W.-S. Kyoung, Fabrication and characterization of eco-friendly functional wallpaper using nonmetallic minerals, POC 64 [2-3] (2009) 311-316.
  33. J. Ni, Q. Zhao and X. Zhao, Transparent and high infrared reflection film having sandwich structure of SiO2 /Al:ZnO/SiO2 , POC 64 [2-3] (2009) 317-321.
  34. E. Colín, M.G. Olayo, G.J. Cruz, L. Carapia, J. Morales and R. Olayo, Affinity of amine-functionalized plasma polymers with ionic solutions similar to those in the human body, POC 64 [2-3] (2009) 322-326.

COSI 2007 / POC 61 [2-4](2008)

  1. G. de With and R.A.T.M. van Benthem, Editorial POC CoSi 2007, POC 61 [2-4] (2008) 103-105.
  2. M. Groenewolt, Highly scratch resistant coatings for automotive applications, POC 61 [2-4] (2008) 106-109.
  3. K.J. van den Berg, L.G.J. van der Ven and H.J.W. van den Haak, Development of waterborne UV-A curable clear coat for car refinishes, POC 61 [2-4] (2008) 110-118.
  4. K. Studer, P. Nesvadba, T. Jung, J. Benkhoff, K. Powell and C. Lordelot, Novel curing agents: Thermal radical initiators as viable alternatives to peroxides, POC 61 [2-4] (2008) 119-125.
  5. J. Mallégol, M. Poelman and M.-G. Olivier, Influence of UV weathering on corrosion resistance of prepainted steel, POC 61 [2-4] (2008) 126-135.
  6. S.G. Croll, X. Shi and B.M.D. Fernando, The interplay of physical aging and degradation during weathering for two crosslinked coatings, POC 61 [2-4] (2008) 136-144.
  7. M. Špírková, J. Brus, L. Brozová, A. Strachota, J. Baldrian, M. Urbanovà, J. Kotek, B. Strachotová and M. Šlouf, A view from inside onto the surface of self-assembled nanocomposite coatings, POC 61 [2-4] (2008) 145-155.
  8. J.M. Stubbs and D.C. Sundberg, The dynamics of morphology development in multiphase latex particles, POC 61 [2-4] (2008) 156-165.
  9. I. Alig, D. Lellinger, H. Oehler, S.A. A. damovsky and C. Schick, Microcalorimetry for characterization of film formation and cure of coatings and adhesives, POC 61 [2-4] (2008) 166-175.
  10. R. Bao and S. Jönsson, Using a new approach to analyze a depth profile of double bond conversion in model formulations, POC 61 [2-4] (2008) 176-180.
  11. A. Brun, H. Dihang and L. Brunel, Film formation of coatings studied by diffusing–wave spectroscopy, POC 61 [2-4] (2008) 181-191.
  12. A.P. Kharitonov, Direct fluorination of polymers–From fundamental research to industrial applications, POC 61 [2-4] (2008) 192-204.
  13. M. Hara, S. Yamakawa, M. Saito, S. Tobe and T. Inaba, Bonding adhesive strength for plasma spray with cathode spots of low–pressure arc after grit blasting and removal of oxide layer on metal surface, POC 61 [2-4] (2008) 205-210.
  14. E. Jaehne, S. Oberoi and H.-J.P. Adler, Ultra thin layers as new concepts for corrosion inhibition and adhesion promotion, POC 61 [2-4] (2008) 211-223.
  15. W.J. Soer, W. Ming, C.E. Koning and R.A.T.M. van Benthem, Towards anti-corrosion coatings from surfactant-free latexes based on maleic anhydride containing polymers, POC 61 [2-4] (2008) 224-232.
  16. D. de la Fuente and M. Rohwerder, Fundamental investigation on the stability of the steel/coating interfaces contaminated by submicroscopic salt particles, POC 61 [2-4] (2008) 233-239.
  17. M. Dornbusch, The use of modern electrochemical methods in the development of corrosion protective coatings, POC 61 [2-4] (2008) 240-244
  18. I.-S. Bae, S.-J. Cho, W.S. Choi, H.J. Cho, B. Hong, H.-D. Jeong and J.-H. Boo, Characterization on polymerized thin films for low-k insulator using PECVD, POC 61 [2-4] (2008) 245-248.
  19. M. Barletta, G. Rubino, L. Lusvarghi and F. Pighetti Mantini, Surface appearance and mechanical strength of multi-layer polymeric films, POC 61 [2-4] (2008) 249-261.
  20. M. Barletta, G. Bolelli, A. Gisario and L. Lusvarghi, Mechanical strength and wear resistance of protective coatings applied by fluidized bed (FB), POC 61 [2-4] (2008) 262-282.
  21. B. Chico, J. Simancas, J.M. Vega, N. Granizo, I. Díaz, D. de la Fuente and M. Morcillo, Anticorrosive behaviour of alkyd paints formulated with ion-exchange pigments, POC 61 [2-4] (2008) 283-290.
  22. J.–H. Kang, H.–M. Cha, J.–H. Lee, Y.–G. Jung, H.–S. Lee and V.K. Srivastava, Synthesis and characterization of non–oxide ceramic coatings on graphite substrates by solid–vapor reaction process, POC 61 [2-4] (2008) 291-299.
  23. J.–Y. Kwon, K.–H. Dong, J.–H. Lee, Y.–G. Jung, U. Paik and C.–Y. Jo, Anisotropic mechanical properties and contact damage in air-plasma-sprayed thermal barrier coatings with bond coating nature and thermal exposure condition, POC 61 [2-4] (2008) 300–307.
  24. M. Lonyuk, M. Bosma, C.A.M. Vijverberg, A. Bakker and M. Janssen, Relation between chip resistance and mechanical properties of automotive coatings, POC 61 [2-4] (2008) 308-315.
  25. S.–W. Myoung, S.–H. Park, P.–H. Lee, Y.–G. Jung, D. Joo, K.–H. Lee, H.–S. Lee and U. Paik, Phase transformation and oxidation behavior of Pt–modified MCrAlY coatings, POC 61 [2-4] (2008) 316-320.
  26. Z. Yi, C. Guofeng, W. Ma and W. Wei, Effect of external bias voltage and coating thickness on the photocatalytic activity of thermal sprayed TiO2 coating, POC 61 [2-4] (2008) 321-325.
  27. Z. Ziari, A. Bellel, S. Sahli, Y. Segui and P. Raynaud, A comparative study on the effect of VUV radiation in plasma SiOx-coated polyimide and polypropylene films, POC 61 [2-4] (2008) 326-332.

COSI 2006 / POC 58 [2-3](2007)

  1. G. de With and R.A.T.M. van Benthem, Editorial, POC 58 [2-3] (2007) 77-79.
  2. T. Nabuurs, S. van der Slot and A. Overbeek, Nanomorphology control in aqueous coatings, POC 58 [2-3] (2007) 80-86.
  3. N. Fedullo, E. Sorlier, M. Sclavons, C. Bailly, J.-M. Lefebvre and J. Devaux, Polymer-based nanocomposites: Overview, applications and perspectives, POC 58 [2-3] (2007) 87-95.
  4. M.L. Nobel, S.J. Picken and E. Mendes, Waterborne nanocomposite resins for automotive coating applications, POC 58 [2-3] (2007) 96-104.
  5. A. Pucci, G. Ruggeri, S. Bronco, M. Bertoldo, C. Cappelli and F. Ciardelli, Conferring dichroic properties and optical responsiveness to polyolefins through organic chromophores and metal nanoparticles, POC 58 [2-3] (2007) 105-116.
  6. L.G.J. van der Ven, R.T.M. Leijzer, K.J. van den Berg, P. Ganguli and R. Lagendijk, Interactions between basecoats and clearcoats in car refinish systems, POC 58 [2-3] (2007) 117.
  7. P. Uhlmann, R. Frenzel, B. Voit, U. Mock, B. Szyszka, B. Schmidt, D. Ondratschek, J. Gochermann and K. Roths, Research agenda surface technology: Future demands for research in the field of coatings materials, POC 58 [2-3] (2007) 122-126.
  8. S.V. Lamaka, M.L. Zheludkevich, K.A. Yasakau, R. Serra, S.K. Poznyak and M.G.S. Ferreira, Nanoporous titania interlayer as reservoir of corrosion inhibitors for coatings with self-healing ability, POC 58 [2-3] (2007) 127-135.
  9. A. Seth, W.J. van Ooij, P. Puomi, Z. Yin, A. Ashirgade, S. Bafna and C. Shivane, Novel, one-step, chromate-free coatings containing anticorrosion pigments for metals–An overview and mechanistic study, POC 58 [2-3] (2007) 136-145.
  10. K. Dietliker, R. Hüsler, J.–L. Birbaum, S. Ilg, S. Villeneuve, K. Studer, T. Jung, J. Benkhoff, H. Kura, A. Matsumoto and H. Oka, Advancements in photoinitiators–Opening up new applications for radiation curing, POC 58 [2-3] (2007) 146-157.
  11. M. Shirai, Reworkable UV curing materials, POC 58 [2-3] (2007) 158-165.
  12. J.F. Jacobs, G.J.M. Koper and W.N.J. Ursem, UV protective coatings: A botanical approach, POC 58 [2-3] (2007) 166-171.
  13. D. Maetens, Weathering degradation mechanism in polyester powder coatings, POC 58 [2-3] (2007) 172-179.
  14. A.V. Fedorov, R. van Tijum, W.–P. Vellinga and J.Th.M. De Hosson, Degradation and recovery of adhesion properties of deformed metal–polymer interfaces studied by laser induced delamination, POC 58 [2-3] (2007) 180-186.
  15. M. Fermeglia and S. Pricl, Multiscale modeling for polymer systems of industrial interest, POC 58 [2-3] (2007) 187-199.
  16. I. Alig, H. Oehler, D. Lellinger and S. Tadjbach, Monitoring of film formation, curing and ageing of coatings by an ultrasonic reflection method, POC 58 [2-3] (2007) 200-208.
  17. A.M. Rhoades, D.A. Wicks, B. Miriyala and J. Williamson, Interactions of an antimicrobial peptide (Ac-RRWWRF-NH2) and surfactants: Towards antimicrobial peptide additives for coatings applications, POC 58 [2-3] (2007) 209-216.
  18. J.T. Huybrechts and L.M. Tanghe. 2.1 VOC solvent borne 2K clear coats based on star oligoethers, POC 58 [2-3] (2007) 217-227.
  19. H. Sasaki, Curing properties of cycloaliphatic epoxy derivatives, POC 58 [2-3] (2007) 227-230.
  20. W. Posthumus, A.J. Derksen, J.A.M. van den Goorbergh and L.C.J. Hesselmans, Crosslinking by polycarbodiimides, POC 58 [2-3] (2007) 231-236.
  21. D. Hegemann, M.M. Hossain and D.J. Balazs, Nanostructured plasma coatings to obtain multifunctional textile surfaces, POC 58 [2-3] (2007) 237-240.
  22. M. Lonyuk, M. Bosma, A.C. Riemslag, J. Zuidema, A. Bakker and M. Janssen, Stone-impact damage of automotive coatings: A laboratory single-impact tester, POC 58 [2-3] (2007) 241-247.
  23. R. Serra, M.L. Zheludkevich and M.G.S. Ferreira, Surface modification of coil coatings with thin plasma polymer films structure and stability, POC 58 [2-3] (2007) 248-252.

COSI 2005 / POC 55 [2](2006)

  1. B. de With and R.A.T.M. van Benthem, Editorial, POC 55 [2] (2006) 71-74.
  2. S.G. Croll, B.R. Hinderliter and S. Liu, Statistical approaches for predicting weathering degradation and service life, POC 55 [2] (2006)75-87.
  3. I. Alig, P.A.M. Steeman, D. Lellinger, A.A. Dias and D. Wienke, Polymerization and network formation of UV-curable materials monitored by hyphenated real-time ultrasound reflectometry and near-infrared spectroscopy (RT-US/NIRS), POC 55 [2] (2006) 88-96.
  4. M. Bosma, R. Brinkhuis, J. Coopmans and B. Reuvers, The role of sag control agents in optimizing the sag/leveling balance and a new powerful tool to study this, POC 55 [2] (2006) 97-104.
  5. S.J.F. Erich, J. Laven, L. Pel, H.P. Huinink and K. Kopinga, NMR depth profiling of drying alkyd coatings with different catalysts, POC 55 [2] (2006) 105-111.
  6. D. Ståhlberg, P. Junestam, M. Johansson and E.K. Gamstedt, Relaxation properties of particle filled coatings: Experimental study and modelling of a screw joint, POC 55 [2] (2006) 112-118.
  7. P.J.A. Geurink, T. Scherer, R. Buter, A. Steenbergen and H. Henderiks, A complete new design for waterborne 2-pack PUR coatings with robust application properties, POC 55 [2] (2006) 119-127.
  8. M. Tielemans, P. Roose, P. De Groote and J.-C. Vanovervelt, Colloidal stability of surfactant-free radiation curable polyurethane dispersions, POC 55 [2] (2006) 128-136.
  9. K. Rissa, T. Lepistö and K. Yrjölä, Effect of kaolin content on structure and functional properties of water-based coatings, POC 55 [2] (2006) 137-141.
  10. L.C.J. Hesselmans, A.J. Derksen and J.A.M. van den Goorbergh, Polycarbodiimide crosslinkers, POC 55 [2] (2006) 142-148.
  11. R.P. Klaasen and R.P.C. van der Leeuw, Fast drying cobalt-free high solids alkyd paints, POC 55 [2] (2006) 149-153.
  12. B. de Ruiter, A. El-ghayoury, H. Hofmeier, U.S. Schubert and M. Manea, Two-step curing processes for coating application, POC 55 [2] (2006). 154-159.
  13. M. Zielecka and E. Bujnowska, Silicone-containing polymer matrices as protective coatings. Properties and applications, POC 55 [2] (2006) 160-167.
  14. P. Uhlmann, L. Ionov, N. Houbenov, M. Nitschke, K. Grundke, M. Motornov, S. Minko and M. Stamm, Surface functionalization by smart coatings: Stimuli-responsive binary polymer brushes, POC 55 [2] (2006) 168-174.
  15. S. Voccia, S. Gabriel, H. Serwas, R. Jérôme and C. Jérôme, Electrografting of thin polymer films: Three strategies for the tailoring of functional adherent coatings, POC 55 [2] (2006) 175-182.
  16. C.S. McDaniel, J. McDaniel, M.E. Wales and J.R. Wild, Enzyme-based additives for paints and coatings, POC 55 [2] (2006) 182-193.
  17. B. Göbelt, Molecular weight distribution in living polymerization, POC 55 [2] (2006) 189-193.
  18. B.K. Kim, B.U. Ahn, M.H. Lee and S.K. Lee, Design and properties of UV cured polyurethane dispersions, POC 55 [2] (2006) 194-200.
  19. J.P. Stropp, U. Wolff, S. Kernaghan, H. Löffler, M. Osterhold and H. Thomas, UV curing systems for automotive refinish applications, POC 55 [2] (2006) 201-205.